Scaling: A Real Necessity for the New Defense Era
The logic of defense procurement is changing. For decades, aerospace programs were measured in years and fleets in dozens of units. Today, unmanned systems are fielded by the thousands: loitering munitions, decoys, target drones and other attritable platforms are designed to be deployed in large numbers and, in many cases, expended. At the same time, threats evolve in weeks, not years. A new jamming technique, a new interceptor requirement or a new operational doctrine can appear almost overnight, and armed forces need industry to be agile and fast.
In this New Defense Era, the ability to produce has become a capability in its own right. A flight control system that performs brilliantly in a prototype is of limited value if it cannot be delivered in volume, on time and with the same quality in the thousandth unit as in the first. Scaling is no longer a commercial advantage; it is an operational necessity. And that is exactly what UAV Navigation-Grupo Oesía’s Autopilots are designed for: their internal architecture has been conceived and optimized from the outset of Mass Production.
Centers of Excellence Built for Mass Production
UAV Navigation-Grupo Oesía has built its industrial model around this reality backed by the in-house production capabilities of Grupo Oesía's industrial infrastructure. Production relies on two complementary centers in Spain, designed to take a product from concept to large-scale delivery in very short timeframes.
In Madrid, our technology center of excellence houses the laboratory where our engineers design and continuously improve our guidance, navigation and control solutions. It is where new capabilities and features are born but also, where our specialists assemble and verify units one by one before they shipped to the costumer.
In Valdepeñas (Castilla-La Mancha), Grupo Oesía's Technology Center is a factory spanning more than 18,000 m². The same center supports some of the most important national and European defense programs, including NGWS/FCAS Eurodrone and many other major aerospace programs. Its capabilities include:
- Clean rooms rated class 100,000 and a more stringent class 10,000, for assembly and testing under strictly controlled environmental parameters.
- Surface-Mount Technology (SMT) and through-hole assembly on a production line verified by the European Space Agency (ESA) in compliance with ECSS-Q-ST-70-08/38.
- A controlled environment meeting IPC J-STD-001 and IPC-A-610 Class 3, the highest class for high-reliability electronics.
- Automated PCB cleaning, contamination measurement and multiple coating methods to protect every board against harsh operating conditions.
- Functional, mechanical and environmental test facilities integrated into the production flow.
This combination means that the critical stages of this production, from board assembly to calibration and final acceptance are carried out within Grupo Oesía's own facilities. By keeping these processes in-house, we control our lead times, quality, full system traceability and our capacity to ramp up, instead of depending on external bottlenecks. This industrial autonomy is fully aligned with the European Defence Industrial Strategy (EDIS) and strengthens European technological sovereignty at a time when it matters most.
Agile Production Through Optimized Processes
Producing at scale is only valuable if every unit performs exactly as specified. At UAV Navigation-Grupo Oesía, quality is not inspected at the end of the line; it is built into every step, starting at the design stage.
Individual calibration, unit by unit: Every autopilot and AHRS is calibrated individually, per serial number. Accelerometers, gyroscopes, magnetometers and air data sensors are characterized using 12-coefficient linear models that reflect their real-world behavior. Each unit passes through a temperature chamber for system-level calibration, since temperature affects every calibration coefficient, and sensors are thermally compensated to perform reliably across the full operating range. A multi-position turning table is used for IMU calibration, revealing potential sensor misalignment, soldering irregularities or assembly issues. Magnetometers are compensated for hard iron and soft iron effects.
Full lifecycle traceability: every component, in both hardware and software, is linked to a specific serial number and customer. This allows precise version control, faster support and long-term maintainability throughout the product's operational life.
Certified quality, tested for the field: a UAV autopilot does not operate in a laboratory. It flies through heat, cold, humidity, vibration and electromagnetic noise, often in contested environments. That is why our testing is designed around the conditions our products will actually face:
- Environmental testing: test chambers simulate extreme temperatures, rapid thermal changes, salt fog, rain and pressure variations.
- Mechanical testing: free-fall and vibration tests validate the physical robustness of every design.
- Recognized standards: our facilities support functional, mechanical and environmental testing to MIL-STD-810, EUROCAE ED-14 / RTCA DO-160 and Airbus specifications.
- Air data validation: precision MPS43 air data test units verify static and dynamic pressure sensors across their full range, from -2,000 to 65,000 ft and up to 450 knots, ensuring accurate airspeed and barometric altitude.
- Acceptance Test Procedure (ATP): before shipping, every product undergoes an individual ATP.
Our manufacturing and quality management system is certified to ISO 9001, AS/EN 9100 and ISO 14001, and operates in line with UNE, ECSS and MIL-STD standards. All measurement and calibration instruments carry certificates from accredited external bodies and are subject to periodic checks. These certifications and standards are not merely administrative requirements; they are reflected in the testing and validation of activities performed throughout our production process. Our flagship VECTOR autopilot, for instance, has been validated at Spain's National Institute for Aerospace Technology (INTA) against MIL-STD-810F and MIL-STD-461F, passing every test without a single design modification.
A smart, connected factory: our production lines are monitored through IoT platforms that collect real-time data from sensors across the process. This enables predictive process control and fast decision-making. Any sensor or component that deviates from its expected behavior is automatically discarded, so only fully compliant parts continue down the line.
Scalability, Robustness, Reliability
Thanks to our facilities and these processes, UAV Navigation-Grupo Oesía produced more than 10,000 autopilot units in 2025. This figure shows that aerospace-grade quality and large-scale output are not mutually exclusive: with the right industrial model, they reinforce each other.
In an era where reaction time to new threats is critical and new operations as Loitering Muntions demand agile, large-scale productions, our customers need a partner that can move quickly from requirement to deliver systems they can trust in the field. Unlike many GNC suppliers that outsource key stages of production to third parties, UAV Navigation-Grupo Oesía designs, manufactures, calibrates and tests in-house, keeping the entire process under control. That is why we are ready to support the programs that will define the New Defense Era with proven capacity at scale.
Discover more about our large-scale production capabilities or contact our team to find out how we can support your program.


